Renaultsport Megane II DCI175 ECU Kit (Mapped by Dervtech)

Discussion in 'Car Parts For Sale' started by CJ_RSport, Jan 30, 2019.

  1. CJ_RSport

    CJ_RSport RSM Moderator

    Just gathering some interest, Ive broke two DCi 175 Motors recently and used the engines for vans, Ive got 2 x ECU kits with UCP and Steering lock and keys. (everything you need to swap over)

    Now I have been good friends with Dervtech since day one and done a lot of development on these Diesels. So Im wondering if anyone with a stock DCI 175 would be interested in one of these kits, I will be getting them mapped before sale. Using my Old map which on my setup achieved 226hp and 353ft lbs. I cant guarantee those figures as I had a few supporting mods. However I do know you would see figures around 210hp and 330ft lbs as that is what we generally see when mapping these cars.

    I'll be looking for £260 posted for these kits. I can also customise the map to suit DPF removal and EGR delete and they can come with popcorn limiter too.

    Now these are from 3 door cars, however it doesn't mean they cant be used for a 5 door. all you would require is someone with a CLIP system to change the setting from a 3 door to 5 door for it to work with the extra doors. I have a 5 door ecu on my 3 door and it just says check door locks but I haven't had time to pop to Mark Black to get this changed over via clip.

    Now as far as i know the DCI GT 150hp runs a different turbo being a GTA1749V, I could be wrong (found one on ebay) but if it is this turbo it would just be a case of fitting this kit and make your GT150 DCi into a mapped 175 running over 200hp. If your unsure if you can send me a picture of the data plate on your turbo i can confirm if this would be suitable.

    Dervtech have agreed to do this so you can save some money and time travelling to Manchester where they are based, all you need to do it swap the Keys, ECU, UCP and Steering lock mechanism and go boosting. They charge roughly £400 for a custom remap so this is quite a saving and is a proven map for this engine.

    If anyone is interested drop me a message or ask on here. These are currently stock at the moment but I will get them mapped upon sale so we can cater for dpf and egr etc.

    Regards

    CJ
     
    YorkshireKyle likes this.

  • Share This Page