oil pressure/temperature, boost and intake guages

eventually I have got time to install (some months ago) and now upload in here.

 

yes, separate sensors.

but you can make it looks very original. also, the oled works very well even under the sunlight.

 

These are what I have ordered

OLED Based Digital Multi-Gauge Yellow
Joystick
Oil Pressure Sensor / Sender
Oil Temperature Sensor
Boost Pressure Sensor
Intercooler Air Temperature Sensor
Peak Alarm / Buzzer

 

some more pictures to show how to make it.

 

clock surrounding - you have to cut the clock support otherwise it obstructs the display.

ecu - simply just put the ecu under the clock, but better to have some velcro underneath to secure it there.

ecu connection - zada tech do have clear marking on the ecu for each sensor but you have to figure out the two wires / three wires, try and error is the key.

oled back - you need a thin template if you want the joystick there. but..... acrylic will be too weak so be careful when you press the joystick, i suggest aluminium.

oled front - peak alarm is only a very small led from zada so i got myself a 8mm super bright led with bezel from RS.

 

I did the display myself but my friend did the rest

Oil Pressure Sensor / Sender - ?

Oil Temperature Sensor - I have an oil cooler sandwich plate drilled for the sensor, so I can have oil cooler when needed in the future.

Boost Pressure Sensor - around the waste gate I guess

Intercooler Air Temperature Sensor - a hole drilled along the intake pipe after the intercooler

 

hmmm, seems like I have to find a way to compare them with a proper gauge then