Selling a full mk3 brake setup to bolt straight on a mk2 225/r26 kit consists of Mk3 brembo calipers (bought new from Renault in 2019) Brembo HC plain discs. These have seen one pad cycle, plus a 2.5k mile road trip and a few laps of the ring. Pagid RS4-2 pads (used on the road and road trip/ring) EBC RP-X track pads 5-6mm left (in the calipers in photos) Pins and retainers Braided lines Spacers Extended bolts. Bolt on kit, but You will need to get some spigot rings for the discs if running std wheel bolts. If running studs, not necessary. £500, can post for £25 extra fully inspired with parcdlforce. cheers, Chris
