I’m looking to get some bucket seats and a pair of 4 point harnesses. Has anyone used this https://www.demon-tweeks.com/uk/schroth-harness-end-fitting-kit-ssp01324/ and if so have you just bolted it below the seat mount and bent it up?
Yeah use them I drilled the tunnel side for one and put one under the seatbelt slide rail mounting bolt on the sill side Prefer to have separate seat and belt mounts
Yeah I was going to use the seat belt bolt for one side anyway. Didn’t want to drill the tunnel side if I don’t have to, that’s why was asking if anyone’s mounted it underneath. If not I may get the carpet out and get a stress plate welded in
