Hey! Following the fitment guide - I Just installed enkei's 18x8 offest 45 and AR-1 235/40/18. My suspension setup is Bilstein b14, with a slight drop. front camber is around -1.5 driver side and -1.2 rear is around -0.5 driver side and -0.4 The first drive nothing was rubbing. I was going back from the shop with trunk full of the oe 19' and no rubbing what so ever. Did another run with empty trunk and it rubbed on the rear. I saw on the threads that there's a screw in 12 oc position that eat the outer tire. so I removed both of them. And there was no rear rubbing. I checked again to just make sure and I noticed that the front wheel arches got littles holes. So my questions is - Will adding a negative camber solve the problem? If so - Should I opt for rear shims + compbrake camber plates? Should I increase the ride height? THANKS!
