Very nice car must i say! Very impressed, would you be intrested in making another 3 gauge center console?
Thanks, have a go at making one yourself it's fairly easy. Look on eBay for universal 3 gauge holder and fibreglass kit and filler from halfords Probley be selling it, braces were about £200 delivered for both
http://www.optimiz-access.fr/chassi...nti-rapprochement-inferieure-megane-2-rs.html http://www.optimiz-access.fr/chassi...lis/barre-anti-rapprochement-megane-2-rs.html those French websites have so nice stuff!!!
fitted the inlet manifold and top engine mount bracket. tried to do the cam cover but couldn't get to the lower bolts, so that can wait till the cambelt needs doing fitting the inlet was actually easy, the inlet ports arnt like a clio where they are machined the megane are just cast aluminium finish IMAG0333 by matt eaton, on Flickr IMAG0331 by matt eaton, on Flickr fitted manifold and bracket Engine bay by matt eaton, on Flickr Engine bay powder coated by matt eaton, on Flickr still need to fit the lower brace and also need to replace the rear exhaust mount
fitted the lower brace this afternoon and also a new rear exhaust mount might be a placebo effect but it feels stiffer than before to me anyway lower brace by matt eaton, on Flickr
Sweet mate need more info on how you painted the red on the badges and also fitting of the rear brace please
the badges, i smoothed them down, then went over with primer then sprayed them UR. i got a couple of decals made the same size of the original writing put then on the red. then i went over with the grey. peeled the decals off then lacquered them the lower brace or the top one?
18mm socket 16mm socket started with the front two 18mm bolts that go in the subframe then the back four 16mm. bit worrying when your laying underneath and undoing the rear 4 bolts and the subframe starts moving, but its fine. remove the old one start by doing up the 4 bolts at the back then the front 2 took about 20 mins
yeah no issues just unbolt and bolt new one on lol no one can see it, RS-racing sell a red one. look though there photos its in there https://www.facebook.com/pages/RS-Racing/264094297084252?sk=timeline
got the head lining retrimmed as well as the A B C pillars managed to get hold of spare trims and a head liner Headlining by matt eaton, on Flickr Interior trim by matt eaton, on Flickr material Fabric by matt eaton, on Flickr painted the roof hands and all the other bits Interior trim black by matt eaton, on Flickr also i broke the alarm sensors when i seeing how the C pillars come off, so i bought a new set and sprayed them black aswell Alarm sensors by matt eaton, on Flickr Black sensor by matt eaton, on Flickr had my mum do the sun visors, she done quite well Sun visor by matt eaton, on Flickr Sun visors by matt eaton, on Flickr All fitted, really pleased with it Retrimmed Headliner by matt eaton, on Flickr Retrimmed Headlining by matt eaton, on Flickr Retrimmed by matt eaton, on Flickr Retrimmed Pillar by matt eaton, on Flickr Retrimmed A Pillar by matt eaton, on Flickr
got this delivered today, hopefully get it fitted tomorrow Intercooler front by matt eaton, on Flickr Intercooler by matt eaton, on Flickr Intercooler by matt eaton, on Flickr
fitted the intercooler this afternoon compared to the standard one New Vs old by matt eaton, on Flickr Fitting intercooler by matt eaton, on Flickr fitted Fitted intercooler by matt eaton, on Flickr Intercooler fitted by matt eaton, on Flickr
You should retrim the parts you have taken off and sell them - could even offer to fit now you know how to do it - could make a good few quid there! I'd love to have it done!
Ta mate, did you use spray glue like for floor tiles to stick it to the liner etc. Oh and how many meters did you buy?!
