Engine forge fmic ktr hard boost pipes cp pistons cp rods arp bottom end bolts forge dump valve tubular manifold garrett gtx3701 turbo with screener pipe into down pipe cat cams supertech valves supertech springs solid flywheel helix 6 piece paddle clutch 890cc injectors with custom fuel rail botch 044 fuel pump swirl pot kw variant 3 coilovers ap 330mm 2 piece discs carbolic c+5 pads heli braided brake lines turbo smart boost controller It's modded
Speak with Josh Cook. He might have something from his big engine build. I can't remember what he did with the inlet that he had. Might have already sold it.
He never uprated it iirc. He wanted to do a trick one but never pressed ahead as I was planning to have them produced on a bigger scale. AFAIK anyway...
No nothing, we just discussed it really when I was at his one weekend working on the car. He may have pressed ahead but I wasn't involved. It was along the lines of a central feed splitting symmetrically into a four.
RS Tuning built a new inlet manifold for their car... https://m.facebook.com/photo.php?fb...12&set=pcb.726304947411968&source=49&refid=13
I'm talking about the big engine build before the one he has at the moment. He sold the engine but not sure if he sold the inlet mani as well.
I thought josh used a 197 manifold and throttle body on his big turbo build? Im sure i read somewhere he chopped the runners and moved the throttle body to the drivers side, then used silicone hoses to connect the plenum to the runners?
