250 Remmap and Upgrade turbo to 340bhp, help!

Discussion in 'Mechanical - Engine, Gearbox, Exhaust etc' started by Guilledippolito1, Jun 21, 2014.

  1. Hello, Im William form Argentine and i making a upgrade to mi car:

    I have:
    - Downpipe 3”
    - Etuners chip generic
    - Filter K&N
    - Injectors originals 485cc
    - Wideband innovate
    -
    Now i add:
    - Billet Cool part Wheel 11 blades , 19T
    - Turbine Wheel Original


    i hope want 340bhp in my car.

    I would like if your making a remap for my car (no generic) is that posible with wire OBD2 ?
    I have a test bench available.

    Best Regards!

    Any sugests are welcome.
    turbo-upgrade-megane-rs-2-et-3 (1).jpg
     
  2. Paul @ RSTuning.co.uk can sell you the adapter for the OBD2 port and write you a map for it.
     
  3. Thanks! =)
     
  4. Or Henk at fastchip will do the same thing for cheaper
     
  5. wont be that much cheaper once going custom
     
  6. Really?
    £600 quid for a stage 1 map from RSTuning (including the fastchip box) then a custom map on top of that? so realistically minimum of £800ish probably more as i think a stage 2 is at least £250 more than a stage 1 from Paul
    Or 650 euro's (515pound ish) for a stage 1 map and box and a custom stage 2 map included in that price - almost half the price!!
     
    Last edited: Jul 7, 2014
  7. I suspect you havent called either of the guys to get a price.

    You dont pay twice for maps. You pay for a map , then a tweak.

    I would email Paul for the price.
     
  8. Pauls aint that expensive, you would be buying the box a custom stage 2, rather then a custom stage 1 + custom stage 2.
     
  9. No but the tuning box's (Both RStuning and fastchip) include the stage 1 map, and their £600 from Rstuning or £315 from fastchip.

    I've inquired with Henk about a custom map for my car (MK2) and that was an extra £200 so all in from fastchip is 515ish same price for the MK3 i believe.

    In previous group buys Paul has normally charged about £200+ vat for a stage 2 on top of a stage 1 price so realistically its going to be at least £800.

    I've emailed paul about adding in 660cc injectors onto henks map and he quoted a price of 595+vat(£714) including the injectors which are £240 and that's without a tuning box (done on the dyno in house) so i don't think the op will get it much cheaper than 800 including the remote tuning box
     
  10. Thanks guys! But is very expensive for my because the change to Argentine doesn't favor... is a lot of many for my.. I will see how i do.
     
  11. If somebody know other solution for my, please tell me... I don't have remap for my preparación, thanks guys!
     

  • Share This Page