Rear auto level sensor

Discussion in 'Electrical & Interior - Security, ICE, Wiring Loom' started by -KarL-, Mar 6, 2014.

  1. Where is this located on the rear beam? Is it easy to get to or on a ramp job?
     
  2. It is located near side rear on the beam, I have only got to it by taking the wheel off but if you had a ramp could do without.
     
  3. Cheers, what does the sensor consist of? As it's come back from its MOT says it's unclipped and the headlight are pointing too low.
     
  4. Consists of a sensor with a bar that is connected to the rear beam, works with the front sensor the move the headlights to compensate for weight/height of car to give the correct level.
    Mine were faulty, replaced front sensor which lasted 4 months and for 3 years I have not had the auto level working. As long as both arms are connected I think it will pass the mot but you need to manually adjust them in a similar way to std lights.

    Ps did not think car would fail for beam being too low?
     
  5. Thanks :smile:

    They only mentioned the rear one, it was working last week so will have a bash at re attaching it at the weekend.
     
  6. Hi Karl died u have a go at the injectors ? I don't know if you saw my post replying to you about doing them
     
  7. Yeah done them the other night, guide of the forum is good. Turns out it was the coils so was a waste of time lol
     
  8. if ya get a problem think i have a rear unit and bar i could help you out with
     
  9. Oh well at least you got them done now you know there good
     
  10. Thats good to know, i will let you know over the weekend :smile:
     
  11. No worrys i will double check where it is just incase
     
  12. If Karl doesn't need it, I may have the bar off you. Mine doesn't seem to have one, yet I've never had issues with them levelling?
     
  13. That bar is the ubiquitous unicorn poo! I thought someone had a CAD drawing or model of one.
     
  14. there is on "the other side" i saw a cad drawing, i had a front missing anl luckly stumbled across someone that had the front/rear and a unit so i got em quick :smile:
     
  15. Mine clipped back in :cool:
     
  16. Anyone got the drawing to make this out of metal, both my link bars are missing, or even a link to buy standard plastic ones from eBay?
     
  17. fceb5efb6eaa9a81ba4a33be5db1b5f2.jpg
    Just found this so il put it here for anyone else that is interested
     

  • Share This Page