You need this stuff https://www.ebay.co.uk/itm/Victor-R...614517&hash=item469424c3fe:g:j24AAOSwoddaa0Un Just make sure the surfaces are clean and oil/grease free, you can put the bearings in and torque them down, you can do all of the other assembling but leave the sump off. When the Reinzosil turns up, fit the nozzle, cut the first step off, then you need to squeeze the sealer in the grove until you can see it seep out the sides all the way up.
if victor reinz of boards. I have in the workshop. then it says mount and tighten. then everything dry and clean, I put the spout of the joint former. put it in and squeeze until it blows all over the place
That correct, it is the only thing that stops the oil from the sump getting into your clutch, well apart from the crank seal
yes that is strange yes! me, by taking that out. and see that it had juntas. I've gone crazy, looking for those gaskets in spare parts
hopefully! puremotorsport does not reply to emails. and I'm getting nervous because I have neither money nor pieces!
It is rare, because from the 22nd day of the order. put pending shipping. but they don't tell me anything. if you can ask, to know what happens. I would be calmer
yes i just got home and check the email. How happy it makes me, to see that on Thursday I have all the material Thank you very much for the inconvenience
Bigger turbo Just get it built so you can use it, have you done the short shifter modification yet ???
hahaha if the turbo is very expensive. something cheaper and that is an improvement for the engine if the lever is already modified
I mean, some improvement. but not as expensive as the turbo. right now spending 2000 € ......... it's impossible
I hope, but I don't think so. I still ask for some things and they will not arrive on time ojala, pero no creo. igual pido unas cosas y no llegaran a tiempo
I'm trying to get a gasket set for an engine i'm working on, going to be at least 6 days maybe longer
You cant go bigger as it fits in a housing, you could drop a couple of degrees, but the ECU might think its not quite warmed up and add extra fuel, this is what it does if the thermostat goes wrong (opens at lower temp)
