250 Speedline 2120 N4

Discussion in 'Suspension, Brakes, Wheels & Tyres section' started by manugtt, Mar 24, 2020.

  1. Morning all! Many of you drive wheels with an offset smaller than oem so, in your experience, with that don´t lose part of handling of the car? I mean, Renault Sport engineers did works very well thir part. Please, look the pic to understand me.
    Renault-Megane-RS-RB8_tecnica_03-1024x680.jpg
    All us likes wheels near the bodywork, looks incredible nice but, maybe that worst to fast road or circuit.
    I ask you that because love the Speedline 2120, but they are 8x18" ET50 or 60 and I´m not sure. I know, I know, we are talking about 5 to 15mm less, possibly I´ll not notice driving, but I like to learn!!:grin:
     
  2. yes most aftermarket wheels are the more common offset like 35,45,55 you can run upto 45 offset and only impacts handling small amount from factory 65 although a 55 would be better if can find the wheel you're looking for
     
  3. Yeah, maybe the thing is not than important and I´m a bit picky, but I have tested many cars with wheel spacers or smaller offsets and it feel like ass in the corners. I find these wheels in ET60 in a french web with a good price(920GBP more or less). Other option ir TD 1.2, but max offset is 50.
    Any advice is wellcome! Thanks bobsan:wink:
     
  4. manugtt likes this.
  5. Good web! Very usefully for my garage! Normally I use pencil, paper and a calculator:sweatsmile::sweatsmile:
    It seems will not notice to much when driving.
    Thanks a lot bobsan!
     
    bobsan likes this.
  6. -Jamie-

    -Jamie- RSM Moderator

    I'd get the speedline, nice wheels and different to the usual TD
     
  7. Yes Jamie, I promise some pics when they comes:wink:
     
    Jukidam likes this.
  8. Anyone know what the correct size of wheel is for TD on the Megane 250? PCD etc. I’m not sure what the standard 18’s are tbh. Thanks
     
  9. Standard wheels are 8.25j et68, i bought some TD's 8.5j et55
     
  10. Cool. Thanks for your help. Any photos so I can see how they look? This is my car at the moment ... standard!
     

    Attached Files:

  11. upload_2020-5-10_16-54-34.png upload_2020-5-10_16-54-34.png

    not the best pic
    upload_2020-5-10_16-56-41.png

    Also have these, still 8.5j et55
    upload_2020-5-10_16-58-39.png
     
  12. Alex, one question. You ride with oem springs?? If you do, can you tell me the height of the car, from centre wheel to arch?? If you can´t, don´t worry!
     
  13. Yes I still have standard springs, for now... yes I’ll send you a pic shortly
     
    manugtt likes this.
  14. Thanks in advance man! Appreciate:wink:
     
  15. Roughly 37CM.
     
  16. Thanks a lot Alex!! That´s front and rear, isn´t it??
     
  17. Alex, you help me a lot. My AST springs are 2cm. lower than cup ones, according to my measurements(mine is 35cm from center wheel to arch). I didn´t want the car more than 3cm low than stock. Now I´m peace on my mind and don´t need to buy a new set or the cup ones.
    I´m really thank you!!:wink:
     
    Alex Essex likes this.
  18. I didn’t check the front, just the rear. I can check the front ?
     
  19. No Alex, that´s enough! Thanks again mate:wink:
     
    Alex Essex likes this.

  • Share This Page