/ Register

250 Check airbag light

Discussion in 'Electrical & Interior - Security, ICE, Wiring Loom' started by Charlie Howard, Aug 8, 2018.

Tags:
Page 2 of 3
  1. Aug 29, 2018 #41
    jimmy

    jimmy

    Also I’ve already shown you were the sensor is on the picture above
     
  3. Aug 30, 2018 #42
    Charlie Howard

    Charlie Howard RSM Club Member

    I don't see any picture in this post
     
  4. Aug 30, 2018 #43
    jimmy

    jimmy

    Try the 8th post in the thread.
     
  5. Aug 30, 2018 #44
    Charlie Howard

    Charlie Howard RSM Club Member

    Photos aren't working for me that's odd. I see it now but it's inside the door which makes it a pain.
     
  6. Sep 24, 2018 #45
    Charlie Howard

    Charlie Howard RSM Club Member

    Someone local with CLIP helped me out and we discovered a few faults. Lots of bulb faults, oil level sensor circuit? fault and the problem we're looking for the left door crash sensor!
     
  7. Sep 24, 2018 #46
    Charlie Howard

    Charlie Howard RSM Club Member

    dsots1w.jpg
    nPY5H6S.jpg
     
  8. Sep 25, 2018 #47
    jimmy

    jimmy

    Yep new sensor need to be fitted within the passenger door.
     
  9. Sep 25, 2018 #48
    Charlie Howard

    Charlie Howard RSM Club Member

    You got a part number for the sensor?
    We cleared the codes so hopefully the only ones that come back are the airbag ones!
     
  10. Sep 25, 2018 #49
    jimmy

    jimmy

    The part number of mine was 988333198R but this was for the drivers door. I'm not sure if it's the same.
     
  11. Sep 25, 2018 #50
    Charlie Howard

    Charlie Howard RSM Club Member

    Looks like the Grand Scenic uses the same part
     
  12. Sep 25, 2018 #51
    Charlie Howard

    Charlie Howard RSM Club Member

    So how did you get it out? I've removed the bolt and it wiggles but I can't get it out.
     
  13. Sep 25, 2018 #52
    jimmy

    jimmy

    Which bolt have you removed?
     
  14. Sep 25, 2018 #53
    Charlie Howard

    Charlie Howard RSM Club Member

    dUOOjEe.jpg
     
  15. Sep 26, 2018 #54
    jimmy

    jimmy

    You need to take the whole metal supporting bracket out. From memory there's 3 bolts. Two near the door catch and one the inside of the door.

    The bracket slides out then you remove the sensor.
     
  16. Sep 26, 2018 #55
    Charlie Howard

    Charlie Howard RSM Club Member

    Great the only screwdriver I don't have, do you know what size torque is it?
     
  17. Sep 26, 2018 #56
    jimmy

    jimmy

    I can't remember sorry
     
  18. Sep 30, 2018 #57
    Charlie Howard

    Charlie Howard RSM Club Member

    Well I just replaced the sensor but the airbag light is still on. Battery was disconnected while I did it. Did the fault need clearing?
     
  19. Sep 30, 2018 #58
    jimmy

    jimmy

    Nope mine went straight off as soon as I replaced it.
     
  20. Sep 30, 2018 #59
    Charlie Howard

    Charlie Howard RSM Club Member

    Wonderful, I'm stumped then because I've followed the wiring and it's all perfect too.
     
  21. Oct 1, 2018 #60
    tof73

    tof73

    can you hear a clicking sound when turning steering from fully turned left to fully right?
    If so then your steering swtche clock is gone and that can through a Airbag light on, sometime an ESP fault too
     
  22. Oct 1, 2018 #61
    Charlie Howard

    Charlie Howard RSM Club Member

    No I don't think so, never seen ESP fault either. I posted my CLIP results above and it's saying passenger impact sensor.
     
  23. Oct 2, 2018 #62
    Charlie Howard

    Charlie Howard RSM Club Member

    Is there a fuse that could have blown in the box under the bonnet?
     
  24. Oct 2, 2018 #63
    Charlie Howard

    Charlie Howard RSM Club Member

    Just realised my original sensor was 988330002R but I got 988333198R as you suggested. Could this be the issue?
     
  25. Oct 3, 2018 #64
    Charlie Howard

    Charlie Howard RSM Club Member

    I'm not getting anywhere with this so it's booked in with Renault next Tuesday and hopefully, it's not too expensive.
     
  26. Oct 3, 2018 #65
    jimmy

    jimmy

    I don’t know tbh...I replaced my sensor with pn: 988333198r from a standard megane coupe and it worked fine but mine was the drivers door as mentioned.
    The passenger door one could be different?
     
  27. Oct 3, 2018 #66
    Charlie Howard

    Charlie Howard RSM Club Member

    I don't think they are different from my searching. I did buy a used sensor so I don't know 100% if it is working that's the problem.
     
  28. Oct 3, 2018 #67
    Brigsy

    Brigsy

    .
     
  29. Oct 3, 2018 #68
    Charlie Howard

    Charlie Howard RSM Club Member

    I already have, picture is higher up in the thread. Fault was the sensor which I've changed yet the airbag light is still on.
     
  30. Oct 3, 2018 #69
    Brigsy

    Brigsy

    Sorry yes seen it after posting. Light should clear if fault has gone.

    Wiring issue ?
     
  31. Oct 3, 2018 #70
    Brigsy

    Brigsy

    If you click on the fault it should give some info how to diagnose and repair from memory
     
  32. Oct 3, 2018 #71
    jimmy

    jimmy

    I’d try buying a new sensor with the same part number you took off so you know for sure. Renault will probably charged £100 and hour for labour and £60+ Just to put in on the diagnostics computer.
     
  33. Oct 3, 2018 #72
    Charlie Howard

    Charlie Howard RSM Club Member

    I'm going to order a new sensor now, hopefully this one works. Renault quoted £80+VAT for diagnostic.

    Wiring is unlikely as it all looks perfect.
     
  34. Oct 3, 2018 #73
    jimmy

    jimmy

    For reference this was my fault. Looking at yours it’s similar so must be the sensor.

    B9B04ADA-9E57-480E-A1F4-A62B2C88E89C.jpeg
     
  35. Oct 5, 2018 #74
    Charlie Howard

    Charlie Howard RSM Club Member

    Looks pretty much the same as mine so it must be a sensor. It arrived today, will fit it tomorrow.
     
  36. Oct 7, 2018 #75
    Charlie Howard

    Charlie Howard RSM Club Member

    Another sensor and the same issue. Doubt I could get 2 faulty sensors. Pissing me off now.
     
  37. Oct 7, 2018 #76
    jimmy

    jimmy

    Surely it’s got to be a wiring fault then?
     
  38. Oct 7, 2018 #77
    Charlie Howard

    Charlie Howard RSM Club Member

    I would think so but I followed the wiring and can't see any issues.
     
  39. Oct 10, 2018 #78
    Charlie Howard

    Charlie Howard RSM Club Member

    Door loom is fucked apparently. They didn't have the part in so waiting for it to arrive. Although since I've had it back the airbag light has been off.
     
  40. Oct 10, 2018 #79
    jimmy

    jimmy

    Probably a loose connection that they've played about with. Depending on how much they're charging id leave it if it doesn't come back on.
     
  41. Oct 10, 2018 #80
    Charlie Howard

    Charlie Howard RSM Club Member

    Already paid for the loom but they haven't fit it yet, should I ask for a refund?
     
Page 2 of 3

    • Share This Page


    • Welcome to our site! Please take a moment and Register today!