push in the yellow tab to unplug the hose then once youve got the intake hose just pull and it should come out
Gonna resurrect this thread to save adding another one. How much of a ballache is it to fit one of these? It looks like quite a tight squeeze in behind the engine.
It's not too bad of a job overall. The hardest part will be tightening the hose clip that goes on the turbo end as there's not a huge amount of space to play with. The way I did it was to basically thread my hand behind the back of the turbo from the hot side and tighten the hose clip with a 1/4" ratchet. There's just enough room to reach and tighten the clip that way.
