I'm just breaking my Megane R26 F1 2.0 T 300 Bhp, If anyone would like any parts please inbox me asap as these usually go very quickly. I will list as much as i can as with as many pictures so you can see the quality. * Interior as standard - Door cards x 4, seat belts, rear seats * exterior mouldings painted in black * Alloy wheels 18" painted in black (2 with scuffs, 2 that arent - at least 6mm tyre tread all around) really need all refurbishing!! * Rear Bumper in good condition with R26R decal on SOLD * front bumper got scratches and a mark on the front passenger side and has a small chip off the top underneath the headlamp. Will need treating and painting. * Doors have little marks on the edges where people have opened them and hit things. I've put thin black rubber strips down the sides to cover it up and prevent happening further. R26R decals * Rear Parcel Shelf * Handbrake mech/handle * 6 Speed Gear Cables **Good Bits ** Mod's * Recaro Seats ** SOLD** * 2.7 mm Straight through Milltek Exhaust System, with a k-tec racing back box (Loud) * De-cat 3mm Downpipe - SOLD * Megane RS250 Turbo Charger - SOLD * Megane RS250 Injectors * Tial - Blow off valve (dump valve) - Very Loud SOLD * GPI Racing 60mm intercooler upgrade - SOLD * k-tech air induction air filter + pipe - SOLD ** Mechanical ** * Wishbone's * P/S Drivershaft * Link Arms * steering Rack * Wheel Hub's / Carrier's (Fully Reconditioned with new bottom bearings) * Shock Absorber complete p/s ONLY * Front subframe * Radiator set with A/C * Gearbox R26 (ND0020) Limited Slip Diff ** SOLD ** * Engine - ** Blown ** * Engine Cover - Dipped/Wrapped (Renault sport 2.0 T decal kit) - SOLD * Gearbox Mountings * Front Brake Calipers - Red Brembo * Rear brake calipers - SOLD ** Electrical ** * Heater motor * Resistor - With Climate Control * Digital heater control Panel * ECU KIT - ** SOLD ** * Steering Wheel Airbag contact switches (cruise control) * Fuse Box * Engine Wiring Loom * Window regulators with motors * P/S Electric folding Wing mirror * D/S Electric folding wing mirror ** SOLD ** * Front Wiper motor * Xenon Headlamps - With Charger Packs - SOLD * Rear Lights - SOLD * Alternator * Starter motor * Air Con Pump * Heater motor If i have missed anything off please ask me. Thanks kierran 07896534737
I've taken the front splitter off as it was knackered pal. I bought a new seat Leon front splitter that everyone's putting on there Megane's for £50. You can have it for £35 it's still in the box.
Hi, do you have the front drivers door handle as mine has peeled on the bullet piece (any pictures?). What condition is the rear suspension in (springs and shocks and pictures if possible). Thanks in advance
Is the rear one on the rear axle? I've got the front one for £30 I'll have to have a look for the rear one.
My bullet piece has pealed also, I can supply the rear shockers and springs that are in good condition for £110 that includes delivery.
I need the front bumper, driver side wing, headlight and arch liner? Help!!! Sent from my iPhone using Tapatalk
Hi, Do you have the N75 / boost control solenoid valve? Thanks in advance, Toby Sent from my iPhone using Tapatalk
Hello pal I can sell you the whole exhaust system cat back (genuine milltek) £300 inc postage. Please send me a message if your interested 07896534737 kierran
Sorry rear beam to me is the crossmember beam behind the rear bumper. You mean the rear axle then? I can send you the rear axle for £200 inc delivery and rear calipers.
Ns hub and carrier £140 and this will have a new bottom bearing changed over before being sent out. (Reconditioned)
Hello pal. Yes still got these available. Front bumper £100 Wing £30 Headlamp £50 Delivery £30 Message me if your interested please 07896534737 kierran
What do you mean reconditioned? What make of swivel cup bearing do you use? What is the condition of the wheel bearing and top swivel bearing? Thanks
Sorry shouldn't put reconditioned it's misleading. I'll put a new bottom bearing in and clean / paint it up to make it look like new. The wheel bearing and top bearing are in good condition. Thanks
An odd one given you have the K-Tec induction kit, but do you have the original rubber intake hose that fits to the airbox? I'm after one as a spare to cut to size for a DIY induction kit, and I've already got everything else.
