Separate names with a comma.
Hi and welcome What is the problem your getting, is it mapped and who did it :neutral: could be a number of things, need more info :dizzy:
Just fit Carbon Lorraine RC8's and have none of the issues, bite from cold is epic and they have never given me concern on track.
I have fitted a DW65c to my old 265, it's not a straight fit like the 225/R26 one, but it is doable with a bit of care and cutting. Wastegate is...
I would suspect the fuel pump, these cars are getting on a bit now, but as RS says, best to get a controlled test on the rollers
No But i will probably will fit a sandwich plate to mine,(with sensors) so i will let you know.
You might have to trim a bit off of the webs in the sump, i didn't have to on the 265 engine i forged, but someone else had to
T4 twin scroll Why what turbo are you thinking of wanting ????
If your going to strip it to put rods in then in reality it's best to do the job properly, i am sorting one out atm, i have a set of Catcam rods...
Not a problem, what power do you want ??? Mk3 ???? Is it a standard engine, not forged ????
A 10 second search on Ebay...
A set of coilovers, BC racing or AST, Nitrons if your loaded :laughing:
BCs, AST's inbound me thinks
ill ask at mine then :openmouth:
just ask at your motor factors
Hi To be honest i don't really know which top plates to use i normally fit coilovers to my cars, BC's mainly but my new one has AST5100's, i'm...
Hi and welcome Patrick You won't go far wrong with a standard Mk3 for track use. Adjustable top mounts for stock suspension (if your allowed) a...
I fitted one to the silver car i forged (i also have one ready to go into my car) when i was building the engine, before the crank went in and...
the drains block, so the water level rises and them runs down into the heater unit and runs out of the bottom into the foot wells
I have a set of Rainsport 5's, not used them in anger on track, so not sure what there like, asymmetric 6's aren't a lot more money and i know...
Brakes, brakes and brakes, HC disc's and some decent pads, forget EBC's except EBC Prorace, i run CLRC8's there mainly for track use, but they...
