Separate names with a comma.
Remove bottom bit of drain pipe, thats generally where the blockages occur. You can fit a slightly larger pipe over the existing one, to extend it...
Plastic sheet will be fine. Cut to size, use a sealant, make sure the drain holes bottom of door are clear, I enlarged them with a drill. Also...
If pedal is going to floor after a few days. it's losing pressure in the line between master cylinder and the calipers. IF there are no visible...
Have you looked at the pad disk area, is the fluid level in the reservoir still ok?
Assuming fluid is not leaking onto the floor, then the fluid is not holding pressure, and leaking back to the cylinder, thats often the cause, so...
If no replies , ask on the Megane Facebook forum.
If the clicking occurs when on the move, and the steering is turned, its usually the driveshaft.
My Garage removed manifold, fitted original cast one, and had a stainless steel part made by a local engineering firm to fit the T20, Standard...
Hi Ian. my car went into my local garage 31 August, got it back today!!.First turbo sent, was the wrong one, second one had play in a bearing,...
I am after a swirl pot, with a separate pump, NOT the combined one. Thank you.
Hi Germy, and welcome. May I ask why you sold the Yaris?. Just curious.
Hi Ian, I had 2 turbos fail from the same tuner, last one at 960 miles, and 10 months use, and of an unknown origin, and would only repair at my...
Hi Ian,I was wondering how you got on at Spa. Sorry to hear of the problems with the car, will you now give up on track days, of try a different...
Who carried out the work, how long ago was it?.
Did you manage to fix the problem?.
Hi Dave, and Welcome. Keep us posted on what you get up to.
My roll cage is steel, I never knew alloy cages existed. Anyone familiar about the strength of alloy in this application?.
Please don't take any offence when we mention braking technic, it's only pointed out in case you linger on the brakes.As people on here state,...
At 83 years old, I do fewer track days than I used to, health and all that, running 360bhp, MK3 plain disks, ds1.11, OR winmax 5 pads, never had...
Post on the Megane forum on Facebook, they are quite active over there. Let us know how you get on.