What have you done to your Car today?

Discussion in 'General Chat' started by Strell2, Jul 23, 2013.

  1. matt e

    matt e South East RSM Area Rep

    still get good radio reception?
     
  2. Well...the list of faults continues with my French tart!! Changed the injectors today and fitted bonnet struts

    5a0qp.jpg
    2lldo9f.jpg
     
    matt e likes this.
  3. @matt e they fitted a treat. Soooooo much better
     
    matt e likes this.
  4. Yeah, no difference, but the Netherlands is quite crowded and flat, so radio reception is hardly an issue at all. I forgot to put my antenna back on after washing the car last week, and I still got good recepten on a 100km drive. :grin:
     
  5. Clean everywhere.

    [​IMG]
     
    L-1011 likes this.
  6. Fitted rear leather seats. Just waiting to collect my leather Recaros.

    Cleaned, oiled and re-fitted my BMC filter.
     
  7. Not today, last week but had trouble uploading pics

    IMG_20160731_133013_zpsvjttashj.jpg
     
  8. Replaced inner driveshaft CV boot clip and inner steering joint fairer clip.

    Stripped front calliper and replaced old pins for Mr Pinks

    2d5952b00cefc6c26c4f66668152200e.jpg
    d81c2cd9fea214bf8dc60ca5bb8a8236.jpg

    Fitted front mudflaps and a rhino lip splitter

    b65a13d1db1d3422054b767cf1081052.jpg


    RS 175 Lux
     
    Nigelo likes this.
  9. Replaced the headlight bulbs, not in a hurry to repeat that!
     
  10. Top tip if you don't want to remove bumper:

    Take off wheel, peel back arch liner, get yer hand up it!! [emoji14]
     
  11. Any pics of the rhino lip fitted?
     
  12. A wee service down in Renault Newtownards with a little oil change...

    20160803_205859.jpg

    And a refurb of the diamond cut steevs to all black, no pics on car yet :-(

    IMG_6453.jpg IMG_6696.jpg
     
  13. -Jamie-

    -Jamie- RSM Moderator

    d59c1b4cd4f857828038dbe03ab903eb.jpg

    Almost finished with the interior.
     

  14. You're not going to be sliding around anywhere in those seats!
     
  15. Not the best pics:

    7b3f831b9773ef93188926775557e6b8.jpg
    79e2305b7d20f5241e45f0c9fe9681ad.jpg
     
    MartijnGizmo likes this.

  16. Looks really well!

    I'm just worried I put it on the front, then i'll start looking for side sill extensions to match, then some rear extensions too....

    :-D
     
    chappers2000 likes this.
  17. Removed, cleaned and sealed all 4 wheels with poorboys today. Took the best part of 3-4 bloody hours mind.
     
  18. Booked the car in for Wheel refurbish and recolour next week, Went for Gunmetal as the slight Blue tinge should go well with the Arctic blue paintwork of car. Will do Pics when complete :smile:

    Also priced up for full cam belt / aux belt / water pump replacement and replacement Disks and pads all round (K-Tek) with my local guy to fit ( health issues means can no longer do my own repairs etc if they're more than basic :confused:
     
  19. Ball joint number two replaced, along with a check strap (£500 I won't see again -_- ) but at least it's not knocking anymore!

    Next up will be tyres and rear discs and pads.... it's only on 37k!
     
  20. This is why I chopped the R26 in for a new car - when you add it all up I can run a brand new car for almost the same.
     
  21. I take it at that price, it's just the antenna and not the base.... Looks good [emoji1303]


    Sent from my iPhone using Tapatalk
     
  22. Fitted recaros

    [​IMG]

    I also serviced my bonnet catch. Service tomorrow, big one too. Belts.
     
    Nigelo and Pyper like this.
  23. Naith

    Naith RSM Admin

    Started on the new rear bumper/diffuser setup. Need to get the boot floor out next to measure up the sandwich sheet I'm going to put in.

    [​IMG]
     
    Nigelo and nikinikolov2000 like this.
  24. 6 yr service. The big one!
     
  25. Completely stripped down my 225 trophy front seats, and after doing a test run on my knackered drivers base cover i let the new covers soak in a bath full of vanish oxi then machined washed them on a 40 degree wash with more vanish.
    I thought they were pretty clean but the water was black (Bath & Washer)

    Ive seen this done on a VW forum but wasnt sure how they would turn out.... but the difference is incredible, especially on the blue cloth and somehow the natural grain has come back on what was smooth leather. Gave them a dose of AG leather care balm to stop them drying out too.
     
    Last edited: Aug 26, 2016
  26. 4add53b5f4f45088000e59bcf04c40a7.jpg db88009a8c073a22ab1a22098ee21ad6.jpg 16334c00e693531358b093b15ac3ab7a.jpg

    Full polybush kit last week inc engine mounts, today it's been drove and cleaned.


    Sent from my iPhone using Tapatalk
     
    Nigelo likes this.
  27. Yesterday, thoroughly hoovered, washed and waxed.

    Today, fitted resistors to the recaro plugs. No more warning light!
     
    Nigelo likes this.
  28. well I striped both front hubs cleaned them fitted new droplinks and anti twist links new shocks and h.r springs. fitted new wheels and track tyres . Orderd a new steering wheel and hub got my self a engine cover .
     
    Nigelo likes this.
  29. -Jamie-

    -Jamie- RSM Moderator

    Had a run out with a M4 today that a friend had as a loan car for the weekend.

    Finished in a Ferrari red individual colour, miles better than the usual boring white ones I see. Still prefer the M3 in terms of looks though. DCT and a smattering of M performance carbon bits with some other tasty options. Well impressed by how planted it was. Think he was saying it was up for 54k.

    Nothing in it in terms of straight line pace with my Megane mind you which was quite surprising.

    I will own a F82 M3 when they are a few years older and cheaper. Cracking things going by the M4

    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]
     
  30. Fitted a sun strip. Cheap mod massive difference.
     
  31. Went to the boosted U.K. Meet in Aylesbury, lovely drive there and great food and cars. Coils failed pretty impressively on the dual carriageway on the way home, so I limped her home and I'm getting that sorted tomorrow. More Meg owners should go to the meet, there were 8 or so but next month is the last one and it would be nice to see more there!
     
  32. Fitted a new starter and a poly bush engine mount. IMG_6719.JPG
     
  33. -Jamie-

    -Jamie- RSM Moderator

    [​IMG]

    [​IMG]

    Dropped these off to be refurbished
     
    Feirny likes this.
  34. Did an oil change.
    Bloody hard to get that oil filter off and on.
    Also sorted out my fan speed selector.
    It would not work on speed 4.
    Took out the glovebox and located the wiring harness,gave it a wiggle and it worked.
    Took it apart and gave it a clean and sprayed with electrical contact cleaner.Put back together and hey presto it works:grinning:
     
  35. Gone all Chav!! :flushed:.

    Was having a few issues with rear lamp cluster so decided to replace the cluster.

    I found a Pair of "Lexus" style Black Smoke units for less than Renault wanted for a single unit, (the Mk2 Ph1 is getting old so manufacturers are clearing stocks).

    These actually suit the car better than I thought, and are fully road legal "e" marked, but am awaiting a stop sometime as they do look a bit dark, but lights show fine.

    Am going to fit LED for all the existing rear lamps to increase light output anyway, just waiting for the Amber indicator lamps to arrive.

    Hopefully the wiring is standard and not reversed like a lot of old Ford designs which need to have wiring reversed to run LEDs ( they use the base centre pin as Neg and the Body as Poz to save costs and so won't work with LEDs without a bit of work), but with these it's an easy fix as the light units have the connectors on flying leads so can simply swap these if needed, (and they will still work with standard bulbs anyway as they are non directional).

    Will post some pics later or when the rain stops
     
  36. Hard wired a next base dashcam and cleared my drains again. Stuck a bit of the wife's shower body buffer mesh in each hole to keep the leaves up top and easy to remove. Will see how it fairs. Water still drains fine. Ditched my cigar lighter socket and fitted a USB socket with cover. Might try and fit another one in the back of the centre console for the kids to use easily.
     
  37. Updated my handles and glove box trim as they looked a little scratched. Really happy with the way it looks. IMG_7017.JPG IMG_7018.JPG
     
  38. Looks great. Is that carbon vinyl wrapped?
     
  39. Yeah, it took a lot of finesse, as the shape isn't ideal. Going to attack the centre console at the weekend while the car is in the garage.
     
  40. Finished the glove box trim today, not sure if I like it yet, any comments are welcome:-) IMG_7032.JPG
     
    rTEM likes this.

Share This Page