Megane RS 265 cup white Nacre ph3

Discussion in 'Megane Projects' started by Daviej, Apr 3, 2018.

  1. Hello I’m Davy , 30y old and from Belgium

    I bought my megane rs 265cup in germany last year
    From 03/2014 with 48.000km

    Options:

    Renault R-link with dat nav and rs monitor 2.0
    Cup pack
    Recaro in fabric
    Red seat belts

    Done myself and my friend ( Dixie )

    - Diamond performance black Renault covers
    - Exhaust trim wrapped in gloss black
    - Milltek downpipe 2.75”
    - mid silencer delete
    - Upgraded engine mounts (2 ) and gearbox mount (1)
    - LED H7 kit Night Eye
    - roof wrapped in gloss black
    - Rhino front bumper lip
    - itg cold air intake
    - CAE Ultra Shifter
    - Wagner intercooler
    - Endless cc40 brake pads front
    - Race Studs M12x1,5 68mm with open nuts
    - Motec Nitro 17” 9j et50
    - Federal FZ201 M 255/40/17 235/45/17
    - KW Clubsport
    - Spacer driveshaft left
    - rear wiper delete
    - brembo grooved discs
    - CGR Trophy R look strut with oem sabelt net

    dc82fa22ab58f4eea8b5dd1c03fa1ef5.jpg

    d3287539649270ab9b6856a55e8bbcf2.jpg

    0bdb934367b31b3b30be7af79ac62787.jpg

    db4c68d11a976d98d879f8a1e7925cbf.jpg

    b424b500522c4a93dba02e49d083ba46.jpg


    Verzonden vanaf mijn iPhone met Tapatalk
     
  2. e34000cc32eb83dd8df39b75601edbcb.jpg

    5a5e00468bd542ca254d330b510f8e65.jpg

    9eb58b3f0854cbb73091be63e92d5ce1.jpg

    85266cb3ce13041069f5a6bb579525d7.jpg




    Verzonden vanaf mijn iPhone met Tapatalk
     
    manugtt, Nigelo, YFZ450SE and 2 others like this.
  3. Very nice.
    Nice house you've got as well [emoji6], especially the garage

    Sent from my SM-G955F using Tapatalk
     
    Daviej likes this.
  4. I’m thinking about hybrid turbo stage 2 incl 630cc deka injectors and uprated clutch!?

    So the turbo can be fully opened :-)


    Verzonden vanaf mijn iPhone met Tapatalk
     
  5. Thx! Haha not my house and garage , But Thx [emoji12]


    Verzonden vanaf mijn iPhone met Tapatalk
     
    grantw likes this.
  6. Looks lovely. Do you have a picture of the back and the exhaust tip?
     
    Daviej likes this.
  7. That looks great!
     
    Daviej likes this.
  8. -Jamie-

    -Jamie- RSM Moderator

    Hello Davy, Good to see you on here!


    Love how yours sits and looks on those wheels, Properly aggressive! How much camber do you run again?
     
    Daviej likes this.
  9. Stunning, love how angry it looks!
     
    Daviej likes this.
  10. 1b0589c611e053e294d3eb92b1e70054.jpg
     
    Paul21 likes this.
  11. For the moment 2.47 degrees


    Verzonden vanaf mijn iPhone met Tapatalk
     
  12. d251299a3087f95726b41ee5ef02117a.jpg

    392560b57c94445f90f5481370237bd9.jpg
     
    Paul21 likes this.
  13. Really does look good. Was at the 'ring over the weekend, so quite a few on 17" wheels. They just look so aggressive!
     
  14. Indeed they look more agressive :-)
     
  15. Looks great!
     
  16. Thx!
     
  17. That does look really nice
     
  18. Thx!
     
  19. Hi mate, welcome.
    Know you well from Facebook page:wink:.
    Car looks ace!
     
    Daviej likes this.
  20. Who we have here [emoji41] Thx Thx [emoji12]
     
  21. Spoke a few times on the RS pages on Facebook mate, and i’m friends with you on Facebook too. Should recognise my car in my avatar
     
    Daviej likes this.
  22. I know I know ;-) thats why I wrote ‘ who we have here ‘ :-p

    I was allready registered like a month or so, but haven’t got the time to post something here :-)
     
  23. Best Facelift MK3 out there. Love it.
     
    Muxa likes this.
  24. Thx!
     
  25. Why are you considering an uprated clutch, as far as I know the rods will bend long before the clutch gives in?
     
  26. Because I bought a hybrid turbo and oem clutch can handle only till 540nm :-)

    So the turbo can’t be tuned fully opened
     
  27. That realy depends on the kind of hybrid you’ve got. A 20T will get you around 500-550nm so standard clutch is fine.
     
  28. Are You sure? Normaly it’s a 20t fir 360-380hp. When turbo is tuned full open , the clutch will slip i think...
    I know somebody with 363hp and 521nm , mapped just under the clutch max. 378
    Hp and 560nm was to much :-)

    Thats Why I was thinking about an uprated clutch plate
     
  29. I’m 100% positive. I made 382/530 or something, not much more to be made with a 20T. That’s with 2.05 bar of boost, maxed out. You need a bigger hybrid for more power.
     
  30. And Totaly No problems with original clutch? Street use or track use?
     
  31. No problems at all with mine, even after a few launch control clutch drops. Have not driven it on track yet since it's currently being upgraded again.
     
  32. Ok but that are launch controls... Ok that is also not do verry good for the clutch, But when she can handle that... Is good news :-)
    But race track temperature is longer...
     
  33. Being spotted at a local cars and coffee meet

    36a40bfe83304d4f6d2634e983e039cd.jpg

    613443160e3a9d67452f6cb564c78486.jpg
     
    Doctor_Proctor and VW TT like this.
  34. Personally I wouldn't go over 520/530Nm on the stock rods, know of a few Dutch ones that went bang above that.. Clutch will be fine, as the pistons.
     
  35. Mine snapped a rod at 382/530 so i would also advise to cap it a bit lower.
     
  36. -Jamie-

    -Jamie- RSM Moderator

    Track driving really doesnt put that much strain on the clutch, Your normally well out of peak torque in them on track.


    I wouldn't push it much over 520nm either tbf, Thats what i run and i wouldn't risk any more, Mainly to preserve the rods more than clutch.
     
  37. noticed you've fitted drive shaft spacer, yet your ride height doesn't look exceptionally low, did you feel needed it as it can be detrimental if gaps too small for the spacer
     
  38. The spacer is needed when you lower the car more than 30-35mm :-) So the driveshaft don’t pop out ;-). Also driving on -2.47 camber ;-)
     
  39. you realise the more camber you introduce the more it pushes the drive shaft back into the gear box, your -2.47° is quite strong and a 30mm drop is not a lot, thats why asked if really needed spacer
     
  40. I know, but it’s how the driveshaft ‘sits’ under that angle ;-)
    Iff You don’t do it , you’ll see Iff you drive sporty, ot will pop out ;-)
     

  • Share This Page